F23 Battery Control Circuit Replacement
When is it necessary:
- Damage to the battery control circuit
Required materials:
- F23 control circuit
- You can order the control circuit compatible with your set through this link.
- 2.5mm Allen wrench
WARNING!
PLEASE READ!
Byqee batteries are lithium-based and carry a high risk of explosion and fire.
If you do not have the technical knowledge to work on the battery pack, do not proceed.
Working on your battery pack is entirely at your own risk. Byqee is not responsible for any damage that may occur as a result of the procedures applied.
Before starting the procedures, ensure that your working environment is free of conductive materials and that you are using protective equipment.
Procedure Steps:
1. Remove your bag. Position your battery pack on a hard surface free of conductive materials and suitable for working comfortably, and first unscrew the Allen-headed bolts.
2. Unscrew the Allen-headed bolts on the front and back.
3. Remove the bottom case.
4. Remove the battery pack from the box and disconnect the socket.
5. Carefully remove the battery control circuit.
6. Install the new circuit in the same way and reassemble your battery pack by reversing the previous steps. The final appearance should be as shown below.
7. Reattach the bottom case of the battery and tighten the bolts.
8. Replace your bag, and your battery is ready for use!