When it is required:
- In cases where the bracket case is damaged.
Required materials:
- Phillips screwdriver
- F23 bracket case
- You can order the Byqee case compatible with your set through this link
!ATTENTION!
!PLEASE READ!
- If you think you do not have the technical knowledge to work on the bracket package, do not proceed with the operation.
- Performing operations on your bracket package is entirely the responsibility of the user. Byqee is not responsible for any damage that may occur as a result of the applied operations.
- Before starting the process, make sure that the work environment is cleared of conductive materials and that you are using protective equipment.
Process Steps:
1-Place your bracket package on a hard surface that is free from conductive materials and comfortable for working.
2- Unscrew the 6 bolts located at the corners of the bottom surface of your old bracket case using an Allen key and separate your old case.
While performing the separation process, observe how the materials inside the bracket are positioned.
3- Place the bottom part you obtained by separating the bracket and the materials inside the bracket into your new bracket part, ensuring to maintain their positions. Attach the bolts from your lower bracket case one by one with an Allen key.
4- After making general checks, ensure that your bracket has reached the shape depicted in the user manual.
After the process, your bracket is ready for use.